Engage IP Tube V35 DL

Request Price
Manufacturer: Engage Communication
Part Number: 040-0V35-C1
Description: Circuit Extension Over Ethernet
Availability: Approx. 1-3 Weeks
Qty: + -

 

Engage IP Tube V35 DL

 

Flexible Serial Data Extensions over Packet Switch Networks

 

The IP Tube V35 converts V35 data connections, which employ leased circuits, into IP packets that extend the circuit over very cost effective Ethernet based LAN/WAN/MAN wired and wireless networks. The IP Tube V35 encapsulates Synchronous or HDLC/SDLC serial data into IP packets and is available with one V35 interfaces ordered as a DCE or DTE. IP Tube V35 facilitates the interconnection of Serial Data Over IP between Data Terminals, Data Acquisition Systems, WAN Routers and Bridges...

Layer 1

In Layer 1 operating mode every bit is encapsulated into an IP packet. The size and frequency of the IP packets can be set with data bit rates from 2.4 Kilobits to 2.048 Megabits per second. Latency minimization is accomplished with multidimensional adaptive clock configurations. A configured number of incoming packets are buffered in order to compensate for the packet delivery jitter introduced by the network. The size of this buffer needs to accommodate the peak amount of jitter.

HDLC over IP

In Layer 2 operating mode HDLC Data frames clocked at 2.4 to 250 Kilobits, such as those used by Wide Area Networking protocols PPP and Frame Relay or proprietary Data Links, are transported within IP packets as HDLC over IP. The latency introduced is dependent upon the clocking rate and the HDLC frame size. Minimum latency is obtained by maximizing the clock rate and minimizing the MTU. HDLC Over IP frames are directly sent out the Serial interface since Clock synchronization is not required. WAN security provisioning, such as firewalling, is maintained.

IP Tubes with HDLCoIP connect to the V.35 leased line interface of an Enterprise's WAN Router and encapsulate the HDLC frames into an IP Packet that is sent to the remote site IP Tube where it is presented to the remote WAN router as the original HDLC frame. Enterprises are able to connect to broadband IP services through their existing proven WAN infrastructure. Internal Ethernet networks remain isolated and security services such as Firewalling are maintained.

 

**Other connector interfaces available, contact websales@emtec.com.au for further information**

 

 Product Data Sheet